P.S. METAL WORKS CO.,LTD.

PRODUCTS SPECIFICATION FOR "COPPER TUBE" AND "BRASS TUBE"

	NSF International

OFFICIAL LISTING

Facility: Chonburi, Thailand

Trade Designation Pipe [G]	Size	Water Contact Temp	Water Contact Material
Alloy 230 Pipe	[1]	CLD 23	BRASS
Alloy 260 Tube [2]	1/8" - 2"	C. HOT	BRASS

[1]	Certified for the following nominal pipe sizes.
	Nominal Pipe Size (Average Inside Diameter) 1/8" - 2"
[2]	Alloy 260 Tube is Certified by NSF to NSF/ANSI 61 for use in drinking water supplies of pH 6.5 and above. Drinking water supplies that are less than pH 6.5 may require corrosion control to limit leaching of copper into the drinking water.
[G]	Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Facility: Bangkok, Thailand

Trade Designation Pipe [G]	Size	Water Contact Temp	Water Contact Material
Alloy 230 Chrome Red Brass Nipple	[1]	C. HOT	BRASS
Alloy 230 Red Brass Nipple [2]	1/8" - 2"	C. HOT	BRASS

[1]

The Certification for the Alloy 230 Chrome Red Brass Nipple is restricted to the maximum lengths and diameters shown below.

Nominal Pipe Diameter
(in.)

Calculated Length
(ft.)

1/8 in.

1/4 in.

3/8 in.

1/2 in.

3/4 in.

1in.

1 1/4 in.

1 1/2 in.

2 in.

7.5
5.6
4.2
3.3
2.5
1.9
1.5
1.3
1.0

[2]

The Alloy 230 Red Brass Nipple and Alloy 230 Chrome Red Brass Nipple are Certified by NSF to NSF/ANSI 61 for use in drinking water supplies of pH 6.5 and above. Drinking water supplies that are less than pH 6.5 may require corrosion control to limit leaching of copper into the drinking water.

[G]

Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

ท่อทองแดง , ท่อทองเหลือง , ไร้ตะเข็บ , โลหะ , อุปกรณ์ก่อสร้าง , ท่อทำความเย็น , ผู้ผลิตท่อ , ท่อประปา , ท่อแก๊ส , ท่อดับเพลิง , ท่อลม , ท่อเพื่อการเกษตร อุตสาหกรรม , PIPE , BRIGHT TUBE , SEAMLESS COPPER TUBE , SEAMLESS BRASS TUBE , COPPER TUBE & BRASS TUBE TO ASTM JIS EN ALLOY C1220 , C2200 , C2300 , C2400 , C2600 , C2700 , C2720 , ASTM B42 , B43 , B75 , B88 , B251 , BSEN 1057 , BSEN 12449 , JIS H3300 , TUBE CUT TO LENGTH , TUBE FABRICATION , OD 1/4” , 1/8" , 3/8" , 2" , 1-1/2" , 1-1/4" , 1" , 3/4" , 1/2" , 2-1/2" , 3” , WALL 0.016” , 0.020" , 0.024" , 0.032" , 0.040" , 0.048" , 0.060" , 0.080" 0.1" , 0.12" , 0.14" , 0.20” , OD 6 mm. – 75 mm. WALL 0.4 mm. – 6 mm. , BRASS TUBE BENDING QUALITY FOR TRAPS , SHOWER ARM , C. P. SUPPLY TUBE, NIPPLES , SLIDING BAR FOR SHOWER , C. P. RAIL FOR TOWEL BAR , TYPE K , TYPE K , TYPE L , TYPE M , TYPE E , TYPE P , OD 3/8" , 1/2" , 5/8" , 3/4" , 7/8" , 1-1/8" , 1-3/8" , 1-5/8" , 2-1/8" , 2-5/8" , 3-1/8" , TEMPER O , OL , 1/2H , H